Contact help@leiainc.com if you have any questions.
All screenshots/illustrations in this manual are simulated and are for reference only. Actual screens may vary due to software updates and are constantly evolving.
Instructions to perform tasks in this manual are based on the default settings and may change depending on the mode and software version on your tablet.
If you're reading a PDF export of this manual, please refer to this link for the latest version: https://support.leiainc.com/lume-pad-2/device/user-manual
Note: Lume Pad 2 is designed to provide an enjoyable and comfortable stereoscopic 3D experience for everyone. Depending on your inter-pupillary distance (a.k.a. IPD, the distance between your eyes), you should hold Lume Pad closer or farther, with an optimal range of between 20cm and 62cm from the display.
Note: To avoid eye fatigue or other issues, it's recommended you take breaks when using Lume Pad depending on your comfort level with stereoscopic 3D.
Learn more about your Lume Pad 2 and how to get started using your new device.
For Technical Specifications, go to: support.leiainc.com/lume-pad-2/device/technical-specs
Lume Pad 2 is powered by a rechargeable, standard Li‐Ion battery. A USB-C charger cable is included with the device for charging the battery. And it requires a 33W+ USB-C power adapter to charge.
For optimal performance and battery life, we recommend fully charging the battery before first use as well as performing 3 full charge and discharge cycles before beginning to perform partial charges.
Connect the USB cable to your power adapter then insert the USB cable into the Lume Pad 2's USB-C port.
Plug the power adapter into any standard outlet.
When you first turn the power on, you should see the boot screen with "Lume Pad 2 by Leia Inc." sign, followed by an animated Leia Inc. loading logo.
Then you will see a welcome screen that says "Hi there", signaling the start of the new user onboarding experience. Follow the on-screen instructions to customize your Lume Pad 2's initial settings.
(Optional) Tap "English (United States)” to change the language
(Optional) Tap "Vision settings" to change the visual settings
Tap "Start"
(Optional) Configure Internet access
(Optional) Transfer data from a previous Android device, connecting it using the USB port > Follow Google instruction
(Optional but highly recommended) Connect your Google Account or create one to connect
Confirm the two-factor authentication
Confirm connection of the Google Account
Configure Google services settings
Tap "Accept"
(Optional) Configure Google Assistant > Follow Google Instruction
(Optional) Configure Google Pay > Follow Google Instruction
(Optional) Add another email account and/or change font size
(Optional but highly recommended) Set device security: face, fingerprint, and/or password unlock > Follow on-screen instruction
Accept Lume Pad 2 Terms of Service
(Optional but highly recommended) Connect your Leia Account or create one to connect
Accept Google Chrome Terms of Service
(Optional) Turn on sync of your Google Account
Sign in with your Leia Account or create one
You can also sign in using Google SSO option integrated with Leia Account service
Accept the Leia FaceTracking permission to enjoy using the 3D•AI experience on your Lume Pad 2
Your Lume Pad 2 is all set up! Tap "Start using your Lume Pad"
You can increase the available storage on your Lume Pad 2 by adding a MicroSD card. Almost all MicroSD cards up to 2TB are supported.
You can then use the Files app or MyOS File Manager to transfer files between the Lume Pad 2's internal storage and the MicroSD card. Some apps may be able to access the MicroSD card directly. Leia apps can not currently do this, but this feature will come to select Leia apps in the future. To expand your storage, follow these instructions:
Refer to the Quick Start Guide visual above to find the "Memory Card Tray"
Notice that there's a small hole in the tray
Put a SIM tool or small pin or paper clip in the hole to eject the Memory Card Tray
Place your MicroSD card inside of it
Re-insert the Memory Card Tray with your MicroSD card
Go to the Settings app
Go to Storage
Tap your MicroSD card
Tap Format (this will erase the files on your MicroSD card, if any)
Tap "OK"
Your Lume Pad 2 storage has been expanded and your MicroSD card is ready to use!
The touch screen is designed to be touched lightly with fingers. Do not push too firmly against the touch screen with either your finger or sharp/pointed objects such as nails, writing utensils, pins, etc. Doing so may result in damage to your Lume Pad 2.
Touch screen functionality may be diminished, inaccurate, or non-functional under the following conditions. It is recommended to avoid these whenever possible:
Operation with a gloved hand
Operation with tip of fingernail
Operation with foreign object on the screen
Operation with protective sheet, cover, or seal on the screen
Operation while the screen is wet
Operation with moist or damp hands or fingers
Tap: Touch an item such as an icon or menu with your finger lightly and release it.
Double tap: Tapping an item twice quickly.
Long Press: Touch an item and continue holding your touch until you see the visual state change or feel a vibration
Swipe: Touch the screen and swipe up /down or left/right
Drag: Touch the screen, drag to the desired position, and release the finger.
Pinch: Touch the screen with two fingers and pinch out or pinch in to zoom in/zoom out screen display.
Scroll: When complete content cannot be displayed, swipe up/down/left/right to scroll the display position.
Power On: In the power off state, press and hold the power button until the system displays the power on animation. The lock screen will then show in about 30 seconds, and slide to unlock.
Power Off: In the power on state, long press the power button until the options prompt opens, then tap “Power off”.
Sleep Mode: When sleep mode is active, the screen turns off to avoid accidental button presses or touch screen selections and to prolong battery life while the device is not in use.
To manually enter sleep mode, press the power button.
Press the Power button again to exit from sleep mode and turn on the screen.
With the screen on, hold the Power button until the options prompt opens, then select restart.
Note: If the touch screen is not accessible, hold down the power button + volume down button for 10 seconds to restart.
If your Lume Pad 2 remains inactive for a period of time, it will automatically lock the screen and enter sleep mode to save power.
Alternatively, you can manually lock the screen in the following ways:
Press the Power button.
Go to Settings > Display > Screen timeout and select a screen timeout period.
Once the lock screen is turned on, swipe up from the middle of the screen to display the password/ PIN/ pattern input panel. Then, enter your lock screen password/ PIN/pattern.
The lock screen appears when you turn on the power or press the power button to exit from sleep mode.
Press the power button or, when enabled, double-tap the screen to wake your device and display the lock screen.
Swipe up from the middle of the screen to display the password/ PIN/ pattern input
panel. Then, enter your lock screen password/ PIN/pattern.
You can change the screen lock and unlocking method from:
Settings > Security > Screen lock > Choose screen lock
Use the volume up/down button to adjust the audio volume if you are listening to songs, movies, or other media.
To adjust the volume of media, alarms, notifications, etc., press the volume up/down buttons and tap the settings icon to adjust the volume.
You can also go to Settings > Sound to adjust the volume.
Press the top/left part of the volume control button.
Press the bottom/right part of the volume control button.
Press a volume button
At the right, below the volume slider, you'll see an icon. Tap it until you see:
Vibrate icon
Mute icon
Note: To unmute or turn off vibrate, tap the icon until you see the Ring icon. If your volume is set to above 0%, you will also hear a click, which confirms your selection
By default, your Lume Pad 2 system navigation will be set to 3-button navigation (Arrow/Triangle, Circle, and Square) at the bottom of the screen to go back, home, and switch apps respectively.
Back: Go back to the previous screen. (It can also close the notification panel, etc.)
Home: Go to Home screen. (To open Google Assistant, tap and hold the icon.)
Switch App: Display recently used applications.
To switch between recent Apps:
Swipe left or right to switch the app you want to open
Tap the app that you want open
To close Apps:
Close one App: Swipe up on the card of the App you want to close
Close all Apps: Tap cross/close button at the bottom center.
When this setting is on, the screen automatically rotates when you move your device between portrait and landscape. There are three ways to change your auto-rotate setting:
Go to Settings > Display > Auto-rotate screen
Go to Settings > Accessibility > Auto-rotate screen
From the Quick Settings panel > Auto-rotate
Note: Some apps or displayed screens are fixed in portrait orientation or landscape orientation.
Hold both the volume down button and the power button at the same time for about one second, and you will see an animation showing the screenshot you captured. To view the screenshot, either tap on the screenshot when it appears in the lower right of your screen, or swipe down from the status bar, and tap the notification of screenshot in your Notification Center to view the captured image. Saved screenshots can also be found in your Screenshots folder inside of your device's Pictures folder.
The App Drawer is a section that lists all installed apps on your Lume Pad 2 that you can access by swiping up on your Home Screen.
To change your App Drawer settings:
• Tap to open your Settings app > Display > App Drawer > ‘Show App Drawer’
Note: The app drawer grid options can also be found in Home Settings. To get there, long-press the home screen.
Your device comes with multiple Home screens to hold app shortcuts and widgets. By default, installed apps will automatically appear on your Home screen.
The Status bar at the top of the Home screen provides device information: the time and notification icons on the left side, and status icons on the right side.
Perform a Google search by inputting spoken or written keywords.
Displays the total number of Home screen canvases. You can tap the desired page icon to go to that page. The dot reflecting the current canvas will be highlighted.
Apps can be fixed at the bottom of the screen to allow access from any Home screen page. The quick access area can place a maximum of five apps.
Remove a favorite app: From your favorites, touch and hold the app that you'd like to remove. Drag it to another part of the screen.
Add a favorite app: Touch and hold an app. Move the app into an empty spot with your favorites.
See 3-button System Navigation for more details.
Lume Pad 2 default home screen is a Leia-branded wallpaper. To check more Leia-branded wallpapers or switch to your own, please check under Settings > Display > Wallpaper.
On the Home screen, touch and hold on a blank area, swipe right / left to choose the Home screen canvas you want, then tap the home icon to set the default main screen.
Change the look of the Home and Lock screens with wallpaper. You can display a favorite picture or choose from preloaded wallpapers.
To change a wallpaper, touch and hold on a blank area of the Home screen, then select Wallpaper.
You can also go to Settings > Display > Wallpaper, then select desired options under Wallpaper to apply to the device.
Widgets are application extensions that run on a Home screen. There are many kinds of widgets, including links to a specific contact, Internet bookmarks, Gmail and email accounts, and many others.
Add a widget
On a Home screen, touch and hold an empty space.
Tap Widgets.
Touch and hold a widget. You’ll get images of your Home screens.
Slide the widget to where you want it. Lift your finger.
Tip: Some apps come with widgets. Touch and hold the app. Then tap Widgets.
Resize a widget
Touch and hold the widget on your Home screen.
Lift your finger. If the widget can be resized, you'll find an outline with dots on the
sides.
To resize the widget, drag the dots.
When you're done, tap outside the widget.
Remove a widget
Touch and hold the widget on your Home screen.
Quickly drag the item all the way up then lifts your figure
Note: Removing a widget does not delete the widget, it just removes the widget from the Home screen.
To configure the Home screen settings, touch and hold an empty space, then tap Home settings.
Touch and hold an app or shortcut.
Drag that app or shortcut on top of another. Lift your finger.
To add more, drag each one on top of the group.
To name the group, tap the group. Then, tap the suggested folder name.
Move an app, shortcut, widget, or group
Touch and drag the item. You’ll get images of your Home screens.
Slide the item to where you want it.
Lift your finger.
Touch and hold the item.
Drag the item up to Remove.
Lift your finger.
Touch and hold the item.
Drag the item up to Uninstall.
Lift your finger.
For Standard Style (hidden app drawer), you can find the "Uninstall," option which will permanently remove the app from your Lume Pad 2.
For App Drawer Style (show app drawer), you can find "Remove," "Uninstall," or both. "Remove" takes an app off your Home screen only. "Uninstall" permanently removes the app from your Lume Pad 2.
The following pre-installed apps on your Lume Pad 2 cannot be deleted:
Settings
Leia Appstore
LeiaPlayer
LeiaCam
LeiaViewer
LeiaFlix
LeiaChat
LeiaFrame
If you want to hide an app on your device, follow the below steps:
Tap and hold the app
Select “App info”
Tap “Disable”
To show the hidden app on the Home screen/app drawer, go to Settings > Apps & notifications > See all apps > locate the app you want to enable > tap "Enable."
Touch and hold an app, shortcut, or group.
Slide it to the right until you get a blank Home screen.
Lift your finger.
Move your apps, shortcuts, widgets, and groups off the Home screen.
After the last one is removed, the Home screen will be removed.
To open the Quick Settings panel, swipe down from the top of your screen. It will be displayed for the following:
Display the edit screen to add, delete or rearrange the quick settings tools.
In the edit screen, select "Reset" to restore to the default.
• Display the Settings menu.
Adjust the screen brightness.
Adaptive brightness is on by default and can be toggled on/off with the button next to the brightness bar. When set to on, brightness will be adjusted automatically.
To turn off, click the A button to manually adjust the brightness
Adaptive brightness on/off can be also found in Settings > Display > Adaptive brightness
When the indicator of the number of pages and the current page position appears below the quick setting tools, swipe the quick setting:
Wi-Fi: Turn on/off Wi-Fi connections and long press to see Wi-Fi connection
options
Bluetooth: Turn on/off Bluetooth and long press to view Bluetooth settings
Flashlight: Press to turn flashlight on/off
Rotation Preference: Turn on for device to auto-detect and rotate the screen;
turn off to keep screen locked in one orientation
Battery Saver: Battery Saver mode will restrict battery usage on high-power
features to conserve and extend battery life
Airplane Mode: Quickly enable and disable airplane mode
Screen Cast: Enable to screen cast to nearby devices
Night Light: Turn on/off night light (blue light) or long press to enter night light
settings and adjust intensity and schedule auto night light timers
Dark Theme: Turn on/off dark theme and long press to enter display settings
Location: Turn on/off Location options and long press to enter location settings
to change app permissions
Dolby Atmos: Tap to turn on/off Dolby Atmos, and long press to enter Dolby
Atmos app setting.
Note: By default, the Bluetooth, auto-rotation, dark theme and location are on.
Tip: If you have several settings turned on, your Lume Pad sometimes hides icons to save screen space. To find the hidden icons, at the bottom of the quick settings tool, you'll find a dot.
Depending on the notifications you want to see, you can change settings for certain apps or for your whole device. Notifications show when you swipe down from the top of your screen. Some notifications can also show on your lock screen and home screen.
To clear one notification, swipe it left or right.
To clear all notifications, scroll to the bottom of your notifications and tap Clear all.
To clear all silent notifications, next to "silent notifications," tap Close
Option 1: In your Settings app
Open your Lume Pad's Settings app.
Tap Apps & notifications > Notifications.
Under "Recently sent," find apps that recently sent you notifications.
To find more apps, tap See all.
Option 2: On a notification
To find your notifications, from the top of your Lume Pad screen, swipe down.
Touch and hold the notification, and then tap Settings.
Choose your settings:
To turn off all notifications, tap Notifications off.
Turn on or off notifications you want to receive.
Option 3: In the certain app
You can control many app notifications from a settings menu in the app. For example, an app could have a setting to choose the sound that the app's notifications will make. To make these changes, open the app and search for the settings menu.
Check the following before the update:
Confirm that the tablet has not been installed with an unofficial firmware version, otherwise, there is a large risk of upgrade failure, and unknown problems may be introduced.
Ensure that the battery is above 30%
Ensure that the Wi-Fi is connected throughout the OTA update.
Steps:
Settings: You will receive a notification when a new version is available. You can also go to Settings > System > Software update to check if the New Update is available. If the Wi-Fi is successfully connected, then it will show “Checking for update.”
Download & Install: Click the New update available and click DOWNLOAD & INSTALL. The software build will start the downloading process. It usually takes 3-4 minutes to finish the downloading page
Installing and verifying: After downloading 100% the page will move to Installing. Please let the installation run until it reaches 100%. The checking page will show up after installing it. On the checking page, it usually takes 5-10 minutes to finish the process.
Restart: After the checking phase is done there will be a notification on the same page and also on the pull-down menu about the restarting options. Users can either RESTART NOW right away after the update or wait and choose to REMIND ME LATER.
The total process will take about 10-20 minutes. During the update process, users can work on something else and wait for the Software Update notification. It will be available on the pulldown menu once it is finished.
Note: If an error or failure message occurs, please wait and try again later.
To reset your Lume Pad 2 to factory settings: Go to Settings > System > Reset options
Warning: Performing a factory reset will erase all settings, applications, and files stored on your Lume Pad 2. As all data will be lost, it is recommended that you perform a backup of any needed files prior to using this function. See more.
There are a couple of ways to access your Lume Pad 2 Settings Menu.
From Quick Settings: Swipe down from the top to expand the Quick Settings panel, tap the Settings icon.
From Home Screen shortcut: On the Home screen, find the Settings app, then tap to open
From Google Assistant: By voice: On your Home screen, first make sure it is listening by either saying "Ok, Google" or tapping on the microphone icon in the Search bar, then say "Settings" to open the Settings Menu. By a word: In the Google Search bar, enter "Settings," then select "Settings" to open the Settings Menu.
If you are not sure exactly where to find a certain setting, you can search for it.
From Settings, tap the magnifying glass icon in the top left to use the search field, then enter the keyword to search.
Control your device’s wireless connections. To connect to Wi-Fi, go to Settings > Network & internet > Wi-Fi > Use Wi-Fi
Turn your Lume Pad 2's Wi-Fi service on or off. When you turn Wi-Fi service on, the Lume Pad 2 will automatically detect nearby Wi-Fi networks.
When airplane mode is activated, your Lume Pad 2’s wireless connections are disabled. And you cannot connect to networks.
Use Bluetooth settings to manage Bluetooth connections, set your Lume Pad 2’s name, and control your device’s visibility.
You can use a USB cable to move photos, music, and other files between your computer and your Lume Pad 2.
To transfer files using a USB cable, insert the USB-C side to the port at the top of the device and the other side to your selected device.
Once inserted, a prompt will appear allowing you to select Charging Only, File Transfer, or Photo Transfer.
Mac Computer Your computer must be using Mac OS X 10.5 and up.
Download and install the Android File Transfer software on your computer.
Open Android File Transfer. The next time that you connect your Lume Pad 2, it should open automatically.
Unlock your Lume Pad 2.
With a USB cable, connect your Lume Pad 2 to your computer.
On your Lume Pad 2, a notification will appear prompting you for a selection.
Under "Use USB for," select File Transfer.
An Android File Transfer window will open on your computer. Use it to drag files.
When you’re done, unplug the USB cable.
Windows Computer
Unlock your Lume Pad 2.
With a USB cable, connect your Lume Pad 2 to your computer.
On your Lume Pad 2, tap the "Charging this device via USB" notification.
Under "Use USB for," select File Transfer.
A file transfer window will open on your computer. Use it to drag files.
When you're done, eject your Lume Pad 2 from Windows.
Unplug the USB cable.
Select the USB device to access the drive and transfer files. Once done, remember to EJECT the device properly to ensure no damage occurs to the drive.
To enable USB Debugging, open your Settings app > About tablet > tap "Build number" 7 times until you get a notification enabling Developer mode. Then you can allow USB debugging in the modal that will appear. Please click the box “Always allow from this computer” and select ALLOW to proceed to the next steps.
Manage and uninstall installed applications. Also, change the settings of notification or permission for each application or delete the data or cache.
Depending on the notifications you want to see, you can change settings for certain apps or for your whole Lume Pad 2. Notifications show when you swipe down from the top of your screen. Some notifications can also show on your lock screen and home screen.
You can allow some apps to use various features on your Lume Pad 2. An app will send a notification to ask for permission to use features on your Lume Pad 2, which you can Allow or Deny. You can also change permissions for a single app or by permission type in your Lume Pad 2’s Settings.
Battery status, app usage, battery saver, battery manager, battery status bar setting.
The first time you use your Lume Pad 2, you should charge the battery to 100% to make sure that it is fully charged before use.
When the battery power drops to 0%, please charge your Lume Pad 2 for at least 10 minutes before attempting to turn it back on.
Warning: To ensure optimal battery performance, please pay attention to the following:
Do not charge in a high-temperature environment that exceeds 45°C / 113°F (such as on a balcony or in direct sunlight).
The lithium battery does not need to be discharged, nor does it need to run out of power before charging. You can charge the Lume Pad even when the battery is still charged.
When the product is not used for an extended period of time, please fully charge it at least once every two weeks to avoid over-discharge of the battery which may affect its charging performance.
Do not short circuit, crush, disassemble or dispose of in fire.
Please do not use the battery after being immersed in water.
The battery is non-removable.
Note: Please use the Lume Pad charger for optimal charging. If using an alternative, the charger must output 33W or more.
The battery level and available time (estimate) are displayed.
Turn on to display the battery charge percentage next to the battery icon on the Status bar.
You can configure the brightness level settings, night light, adaptive brightness, dark theme, screen timeout, screen rotation setting, font size, display size, screen saver, lock screen display.
Brightness Level
Adjust the screen brightness according to lighting conditions or personal preference.
Settings > Display > Brightness level
Drag the Brightness slider to set a custom brightness level.
Adaptive Brightness
Settings > Display > Adaptive brightness
Tap Adaptive brightness to automatically adjust the screen brightness based
on the lighting conditions.
Night Light
Settings > Display > Night Light
Set the screen in a yellowish tone so that you can easily see the screen even in low light. You can control over the intensity of the Night Light effect.
By default, the Lume Pad app drawer is hidden. Follow the steps below to enable the app drawer.
Settings > Display > App Drawer > Select ‘Show app drawer’
Note: The app drawer grid options can also be found in Home Settings. To get there,
long-press the home screen.
Turn on to apply the dark theme to the corresponding screen or display.
If your Lume Pad remains inactive for a period of time, it will automatically lock the screen and enter sleep mode to save power. Screen timeout range from 15 seconds to Never. To manage the duration of time your Lume Pad remains idle before entering sleep mode, go to Settings > Display > Screen timeout.
Set whether to switch portrait/landscape view automatically according to the terminal orientation. To Turn on /off, go to Settings > Display > Auto-rotate
To change font size, go to Settings > Display > Font size
To make the items on your screen smaller or larger, go to Settings > Display > Display size
To set the screen saver, go to Settings > Display > Screen Saver
You can display colors or photos when the screen turns off or while charging.
• Settings > Display > Lock screen display
You can increase or decrease your Lume Pad’s volume as well as change your ringtone, sound, and vibration levels.
To change the volume of sounds, go to Settings > Sound Slide the volume levels to where you want them:
Media volume: Music, videos, games, other media
Alarm volume • Notification
Tip: If your Lume Pad is paired to more than one Bluetooth device, you can change where you hear music, videos, and games. Under "Media volume," tap Play media to and select desired source.
Tap Default notification sound or Default alarm sound.
Pick a ringtone.
Tap Save.
Enjoy Dolby Atmos sound quality with LEIA apps/videos. Dolby Atmos offers Dynamic, Movie, Music, and Custom options to users.
Settings > Sound > Dolby Atmos
To experience the full sound effect, please download Atmos-compatible apps like Tidal.
To check usable internal storage space, see what’s using storage or free up additional storage space, go to Settings > Storage.
To manage your Lume Pad’s use of personal information, make application permission, password display and other settings, go to Settings > Privacy.
When you have location turned on for your Lume Pad, you can get info based on its location. To manage your Lume Pad’s use of location information, go to Settings > Location. You can also turn your Lume Pad’s location on or off with Quick Settings.
To view and manage your Lume Pad 2's Google Play Protect, Find My Device, Security update, Google Play system update, Screen lock, Smart lock, Device admin apps, Encryption & credentials, Trust agents and Screen pinning, go to Settings > Security.
By default, if a screen lock is used, the device will automatically lock when the screen times out. You can set up a screen lock to help secure your Lume Pad. With this setting enabled, each time you turn on or wake your Lume Pad, you’ll first be asked to unlock it with either a PIN, pattern, or password.
Important: To ensure your automatic and manual backups are encrypted with your screen lock, use a PIN, pattern, or a password.
Settings > Security > Screen lock
To pick a kind of screen lock, tap Screen lock.
If you’ve already set a lock, you’ll need to enter your PIN, pattern, or password before you can pick a different lock.
Tap the screen lock option you’d like to use. Follow the on-screen instructions.
Below are the screen lock options you will find on your Lume Pad 2
None: Your Lume Pad stays unlocked. This gives no protection, but you can get to your Home screen quickly.
Swipe: Swipe your finger across your screen. This gives no protection, but you can get to your Home screen quickly.
Pattern: Draw a simple pattern with your finger.
PIN: Enter 4 or more numbers. Longer PINs tend to be more secure.
Password: Enter 4 or more letters or numbers. A strong password is the most secure screen lock option.
Note: To ensure the security and privacy of your device, we highly recommend setting a lock. Please make sure you remember the lock pattern, PIN, or Password you set as the device cannot be unlocked without it.
To access your email, contacts, and calendar, and to get apps from Leia Appstore or the Google Play Store, you can add accounts to your Lume Pad 2. When you add a Google account, info associated with that account automatically syncs with your Lume Pad 2. When you remove an account, everything associated with that account is also deleted from your Lume Pad 2. This includes email, contacts, and settings.
Settings > Accounts > tap Add account
Tap the type of account you want to add.
• To add your Google Account, tap Google. When you sign in with a Google Account, the email, contacts, calendar events, and other data associated with that account automatically sync with your Lume Pad 2.
• To add a different personal account, tap Personal (IMAP) or Personal (POP3). You'd generally choose these if you use an email program like Microsoft Outlook or Apple Mail. Learn how to use IMAP or POP3 with Gmail.
Follow the on-screen instructions.
If you're adding accounts, you may need to enter your Lume Pad 2's pattern, PIN, or
password for security.
Tip: If you would like to lend your Lume Pad to a friend, you can learn how to create a separate user instead of adding an account.
Settings > Accounts
Tap the account you want to remove > Remove account.
Accessibility services are special features to make using the Lume Pad 2 easier for those with certain physical disabilities. To activate these services, go to Settings > Accessibility.
Digital Wellbeing is a dashboard and set of features that gives you visibility into how much you're using your Lume Pad 2, which apps are notifying you the most, and provides a set of tools to help you manage that use if you so choose. With Digital Wellbeing, you get controls and features that work for any moment during the day: relaxing, working, or just checking in on how you’re using your Lume Pad 2.
Check, change, or delete information or settings related to your Google account and the services.
To change the language, go to Settings > System > Languages & Input > Languages
To add a language:
Tap Add a language.
Choose the language that you want to use.
Touch and drag your language to the top of the list.
To remove a language:
At the top, tap the More icon > Remove.
Pick a language.
At the top, tap the Delete icon.
To change the following gesture settings, go to Settings > Gestures
Jump to camera
System navigation
Prevent ringing
To set date, time, time zone or 24-hour format manually, turn off "Use network-provided time", or "Use locale default". From Settings > System, the following other options are available:
Time zone: Select region, time zone according to the location
Set date: Turn off use network-provided time, select the current date
Set time: Turn off use network-provided time, select the current time > click ok
Use locate default: Turn off use 24-hour format
User 24-hours format: Turn off use local default.
To reset Wi-Fi & Bluetooth, app preferences or erase all data (factory reset), go to
Settings > System > Reset options
Important: A factory reset erases all your data from your Lume Pad 2.
Plug your Lume Pad 2 into a power source. Keep it plugged in until the reset
completes.
Settings > System > Reset options > Erase all data (factory reset). If needed, enter
your PIN, pattern, or password.
To erase all data from your Lume Pad 2's internal storage, tap Erase everything.
When your Lume Pad 2 has finished erasing, pick the option to restart.
Set up your Lume Pad 2
Note: A factory reset can take up to an hour.
You can share your Lume Pad 2 with family and friends by creating a user profile for each person. Each user profile has a personal space on the device for custom Home screens, accounts, apps, settings, and more.
Add User To add, update or remove a user, you must be the device owner.
Settings > System > Multiple users > Add user or profile
If you can't find this setting, try searching your Settings app for users.
Switch User
From the top of any Home screen, the lock screen, and many app screens, swipe down from the top. This opens your Quick Settings.
Tap Switch User.
Tap a different user. That user can now sign in.
Delete User
If you’re the device owner
Settings > System > Multiple users
If you can't find this setting, try searching your Settings app for users.
Next to the user's name, tap the Delete icon and confirm. The user will be removed from the list.
If you're a user who isn't the device owner
Settings > System > Multiple users • If you can't find this setting, try searching your Settings app for users.
Tap More icon.
Tap Delete [username] from this device. Important: You can't undo this.
The device will switch to the owner's profile.
See Sofware Update above for more details.
To view device information available for your Lume Pad 2, go to Settings > About tablet:
Device name
Legal information
Model & hardware
Android version
IP address
Wi-Fi MAC address
Bluetooth address
Up time
Build number
Certification
Learn more
Note: The Lume Pad 2 doesn’t support IMEI (International Mobile Equipment Identity).
The Lume Pad supports third-party applications based on Android platform, which can be obtained from the network for installation and use. Trust source needs to be opened in settings
Download from Leia Appstore
Use adb to upload apk
Adb install function
Download from cloud
Mac Computer (Your computer must be using Mac OS X 10.5 and up.)
Download and install Android File Transfer on your computer.
Open Android File Transfer. The next time that you connect your Lume Pad, it
opens automatically.
Unlock your Lume Pad 2.
With a USB cable, connect your Lume Pad 2 to your computer.
On your Lume Pad 2, tap the "Charging this device via USB" notification.
Under "Use USB for," select File Transfer.
An Android File Transfer window will open on your computer. Use it to drag
files.
When you’re done, unplug the USB cable.
Windows Computer
Unlock your Lume Pad 2.
With a USB cable, connect your Lume Pad 2 to your computer.
On your Lume Pad 2, tap the "Charging this device via USB" notification.
Under "Use USB for," select File Transfer.
A file transfer window will open on your computer. Use it to drag files.
When you're done, eject your Lume Pad 2 from Windows.
Unplug the USB cable.
Alternatively, you can directly upload the desired files to a USB-C.
Plug the USB-C flash drive directly into the port on the top of the tablet.
Download the files directly onto the tablet.
Put the device into developer mode
Tap Settings > About Tablet > About Device
Scroll down and tap build number 7 times
Go back to Settings > System > Developer options > Turn on USB debugging
You are now in Developer mode.
Note: When not actively using developer mode please disable USB debugging in Settings > System > Developer options
The third-party license, Google legal, Google Play system update license, System WebView license, Wallpapers are listed in the Lume Pad 2 legal section of Settings. It is in the “About tablet” section
Settings > About tablet > Legal information
Or, use the search feature in the settings on the upper top left to search for “Legal
information.”
Pertinent legal information can be found at www.leiainc.com or the web pages provided below for specific provisions related to your device.
Privacy Policy: www.leiainc.com/legal/privacy-policy
Terms and Conditions: www.leiainc.com/legal/terms-conditions
Warranty Policy: support.leiainc.com/customer-support/warranty
All of the intellectual property owned by Leia Inc. or its respective subsidiaries related to the Lume Pad 2, is proprietary to Leia Inc. and protected under federal laws, state laws, as well as international treaty provisions. Inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship.
Modification of Leia software is prohibited, and Leia Inc. is not liable for performance issues or incompatibilities caused by your editing of registry settings, or modifications to the Operating System (OS).
Lume Pad 2 and other Leia products are covered by patents. For the latest patent information, please go to www.leiainc.com/legal/patents
Copyright © 2023 Leia Inc. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Leia Inc. is under license.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos are trademarks of Dolby Laboratories.
Other company and product names mentioned herein may be trademarks of their respective companies.
The first time you use your Lume Pad 2, you should charge the battery to 100% to make sure that it is fully charged before use. When the battery power drops to 0%, please charge your Lume Pad 2 for at least 5 minutes and then restart.
Warning: To ensure the best use of lithium battery, please pay attention to the following:
Do not charge in a high-temperature environment (such as a balcony or direct
sunlight).
the lithium battery does not need to be discharged, nor does it need to run out of
power before charging. You can charge when the battery is still charged.
When the product is not used for a long time, please fully charge it at least once
every two weeks to avoid over discharge of the battery which may affect its charging performance.
Due to the variety of internal circuitry and battery components found in a device, you must properly dispose of these devices by using approved recycling services.
Warning: Do not throw away your battery in the trash as it contains potentially hazardous materials.
Avoid exposing your device and components to extreme heat or cold.
The device can safely be used in locations and environments within house
temperatures between 0°C / 32°F and 35°C/ 95°F.
Avoid prolonged exposure of your device to temperatures below 0°C / 32°F or
above 45°C / 113°F.
Do not store your device in extremely hot areas (such as the inside of a parked car in
the summertime). Doing so can cause issues such as: screen malfunction due to burn-in, overheating of the internal components, and leakage or explosion of the internal battery.
Do not expose your device to direct sunlight for an extended period of time (such as by leaving it on the dashboard of your car). This can damage your screen.
Children or other persons requiring supervision can accidentally choke on small device components or parts, especially if they have broken off.
If a child or other person tries to suck on or bite the device, this can lead to water damage and puncturing of the housing. Damaged batteries can leak caustic and toxic materials. Do not let the mobile device or battery come in contact with liquids.
Keep the mobile device dry. Precipitation, sweat, humidity, and liquids contain minerals that will corrode electronic circuits. Do not turn on your device if it is wet. If it was already wet when on, immediately turn off your device and dry it with an appropriate towel.
Avoid exposing your device, battery or other components to extremes of heat, cold, or wet conditions as this can place undue stress on the device components.
Avoid exposing the device to environments with high external pressures, which could lead to internal damage or overheating.
Never use a damaged battery. If you consider a battery to be damaged, please seek technical support to obtain a replacement. Use of a damaged battery can cause electrical shorts, overheating, and other component failures.
Avoid dropping the device or battery.
You are in an environment where use of your device is not authorized or restricted. This can include areas with flammable materials, hospitals and fueling areas.
You notice any unusual smells coming from your device or battery.
You see any smoke or liquids coming from your device.
Your device or battery begins to overheat, even while not in use.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the mobile device.
Wipe it with a soft cloth slightly dampened in a mild soap and water solution; dry the device with a soft, lint-free cloth. DO NOT APPLY THESE CLEANING SOLUTIONS TO THE CHARGING TERMINAL OR COMPONENTS.
In order to give full play to the performance of the new tablet computer and avoid improper operation, please read this operation manual carefully before using this product.
Do not place the tablet computer in hot, cold, dusty, wet and other environments.
When using this product, do not let the tablet fall or make the hard object hit the
screen, which will cause damage to the screen. The user shall be responsible for the
product damage caused by man-made or other force majeure.
Try to avoid operating the tablet in a dry environment to prevent static electricity.
Please charge in the following cases:
A when the charging indicator is not green;
The tablet automatically shuts down or turns on and off.
Do not place heavy objects on the tablet, otherwise it will damage the tablet.
When the machine is used as a mobile hard disk, the user should export the file
according to the correct file management operation method. The company will not
be responsible for any loss of the file when the error occurs.
Because a small part of the memory space will be used by the software in the tablet
computer and the memory capacity of the computer is in different decimal places, the memory capacity displayed in the operating system will be less than the standard value, which is in line with the relevant regulations.
If the memory becomes corrupted or damaged it is recommended to factory reset your device in order to attempt to restore normal operation.
Laser certification
Class-1 lasers are safe for the eyes in all operations even for a long time and with optical instruments. These lasers usually possess a very low output power (a few microwatts).
Note: Leia Inc. reserves the right to improve our products. As such there may be some performance or functionality differences between products with different hardware, for which Leia Inc. will not provide specific notice.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device does not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
Your Lume Pad 2 is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless tablet devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the tablet transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the tablet while operating can be well below the maximum value. This is because the tablet is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a tablet device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this Lume Pad 2 when tested for use at the ear is 0.82 W/Kg (Body-worn measurements differ among Lume Pad 2 models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various Lume Pad 2 and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this Lume Pad 2 with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this tablet device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: 2AWLP-LPD10-11. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for tablet devices used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
For customer support, contact help@leiainc.com For developer support, contact developers@leiainc.com
Leia Inc. Menlo Park, CA 2440 Sand Hill Rd. STE 100 Menlo Park, CA. 94025 www.leiainc.com
